Faq

The method we use for cleaning is hot water extraction, commonly referred to as steam cleaning. Everclean’s exclusive hot water extraction method removes the toughest, deepest dirt safely and gently. Hot, soft water and a specially formulated cleaning solution are injected deep within the carpet fibers. Then, a powerful suction extracts deep-down dirt, allergens, cleaning solution and 95% of the moisture. It’s the cleaning method most recommended by carpet manufacturers.

A light vacuuming in the traffic areas is recommended but not required. If needed, the crew can pre-vacuum the area to be cleaned. Also, the equipment is vacuuming the entire time we are cleaning.

Typically, an area is a room that is up to 300 square feet (that is 15 x 20 or approximately the size of a two-car garage). Living room/dining room combos are considered two areas. Any area over 300 square feet but less than 600 square feet is priced as two areas. Non-standard areas (baths, halls, landings, walk-in-closets, etc.) are priced separately from the standard areas, usually at a lesser price. Please know that these room sizes may vary by location.

On average, it will take approximately 20 minutes per room. This time can vary greatly depending on the amount of furniture to be moved, how soiled the carpet is, and any necessary spot removal treatments.

There is no charge to move furniture. Our crews are professionally trained to move your furniture, and return it to its rightful place when cleaning is completed. There are several items we recommend not moving, such as: pianos, electronics, china cabinets, waterbeds, some large beds, dressers with mirrors, etc. We do suggest you remove items off of your furniture like plants, lamps and knick knacks. If you would like, you may reach your local Everclean at +91 98432 72132. The customer service advisor will be able to answer any technical questions you might have as well as provide a cost estimate. Thank you for your inquiry and interest in Everclean. Please feel free to contact us once again if you need further assistance.

Ahen an unknown printer took a galley of type and scrambled it to make a type specimen book areIt hasear survived not only five centuries, but also the leap into electronic typesetting, remaining essentiall yellow aw unchangedh.

Regular mopping just doesn’t reach the stubborn dirt that lies deep in the pores of your floor, but our cleaning process does. This process includes an initial vacuuming of the areas to remove any loose dirt and debris, an auto scrubbing with an alkaline cleaner and then another auto scrubbing with a neutral cleaner to return the floor to its initial sheen. Edges are hand scrubbed, as are stairs.

YES, WE OFFER TWO TYPES OF SEALANT:
Clean & Maintenance Coat
Clean and Maintenance Coat your Floor with a combination of our deep cleaning and an application of our floor floor refinisher. First, we remove dirt and debris with our cleaning process, then we’ll coat your floors with our Maintenance Coat solution. Our fast drying Maintenance Coat will leave your floors with a uniform, overall sheen. When cleaning just isn’t enough, refinish your floor with our Maintenance Coat process. Clean & Poly Coat
Clean and protect your floor with Everclean’s Poly Coat technology. Our durable, quick-dry Poly Coat will provide a protective layer to your floors. After our deep cleaning process, we will coat your floor with an even layer of our Poly Coat solution, creating a barrier against water and chemical damage. In addition to helping your floor resist scratching and scuffing, it will leave your floor with a consistent shine. Keep your floor protected and looking good longer.

Have you Any Question?

Contact Form

30% Discount

Promotion Offer 16 Days
Contact With US
× How can I help you?